Ural Sahara, 2009

Ural Sahara, 2009

 

 Specifications

MSRP: $13,949 excluding taxes, title and licensing, registration, destination charges and dealer setup. Dealer prices may vary and are subject to change.

Model number IMZ-8.1037
Dimensions (L x W x H) 2580 x 1700 x 1100 mm / 101.6 x 66.9 x 43.3 inches
Seat height 785 mm / 30.9 inches
Road clearance 125 mm / 4.9 inches
Dry weight 335 kg / 739 lbs
Recommended max speed 95 km/h / 62 mph
Engine OHV Air-cooled, four-stroke, flat twin cylinder
Bore & Stroke 78 & 78 mm
Compression ratio 8.6:1
Displacement 749 cc
Rated 40 HP @ 5600 RPM
Carburetion Twin KEIHIN L 22 AA Carburetors
Clutch Dry double disc
Rated Torque @ 4000 RPM 52 Nm / 38 ft-lbs
Alternator (14 Volt) 55 Amps / 770 Watts
Starting Electric and Kick-start
Gearbox 4 forward, 1 reverse, shaft drive
Fuel 91 Octane Unleaded
Tank Capacity 19 liters / 5.0 US gallons
Front Brakes Front - BREMBO disk brake
Rear Brakes Rear and sidecar wheel - IMZ drum brake
Ignition Electronic
Front suspension Leading link forks
Rear suspension Hydraulic spring shock absorbers
Wheels 19", chrome steel spokes and cast aluminum hubs

Special features Standard specifications include engageable sidecar drive shaft, main fairing for the driver, front sidecar bumper, gas canister, shovel, spotlight, luggage rack and spare tire. For further details, please contact your selling dealer.

Husqvarna TE310, 2009

Husqvarna TE310, 2009

 

 Specifications

Engine
Type Single cylinder, 4-stroke, DOHC, 4 valve
Bore 83 mm
Stroke 55 mm
Displacement 297.6 cc
Compression ratio 12.9 : 1
Starting Electric and Kick (with automatic decompressor)
Cooling Liquid-cooled
Radiator 2
Lubrication Dry sump with 2 oil pump rotors and cartridge filter
Ignition Electronic, inductive discharge, with adjustable advance (digital control)
Spark plug type NGK CR 8EB
Spark plug gap 0.7 mm
Fuel system electronic injection feed
Clutch Wet, multi-plate, hydraulic control
Driving disc number 7
Driven disc number 6

Chassis
Type Steel single tube cradle with steel round tubes
Rear frame in light alloy
Front suspension MARZOCCHI USD telescopic hydraulic fork with advanced axle compression and rebound stroke adjustment
Fork leg diameter 50 mm
Fork travel 300 mm
Rear suspension SACHS Progressive Soft Damp type with single hydraulic shock absorber, spring pre-load adjustment. Compression and rebound adjustment (compression stroke - double adjustment)
Rear wheel travel 296 mm
Front brake 260 mm BREMBO fixed disc "wave" type with hydraulic control and floating caliper
Rear brake 240 mm BREMBO floating disc "wave" type with hydraulic control and floating caliper
Rim front 1.60" x 21", light alloy
Rim rear 2.15" x 18", light alloy
Tyre front 90/90-21" MICHELIN Enduro Competition 3
Tyre rear 120/90-18" MICHELIN Enduro Competition 3

Electrical Equipment
Voltage 12 V
Head light 35/35 W
Pilot light 3 W
Tail light 5 W
Stop light 21 W
Turn signal 10 W
Battery 12 V - 6 Ah

Husqvarna TE250 Specifications, 2009

Husqvarna TE250 Specifications, 2009

Engine
Type Single cylinder, 4-stroke, DOHC, 4 valve
Bore 76 mm
Stroke 55 mm
Displacement 249.5 cc
Compression ratio 12.9 : 1
Starting Electric and Kick (with automatic decompressor)
Cooling Liquid-cooled
Radiator 2
Lubrication Dry sump with 2 oil pump rotors and cartridge filter
Ignition Electronic, inductive discharge, with adjustable advance (digital control)
Spark plug type NGK CR 8EB
Spark plug gap 0.7 mm
Fuel system electronic injection feed
Clutch Wet, multi-plate, hydraulic control
Driving disc number 7
Driven disc number 6

Chassis
Type Steel single tube cradle with steel round tubes
Rear frame in light alloy
Front suspension MARZOCCHI USD telescopic hydraulic fork with advanced axle compression and rebound stroke adjustment
Fork leg diameter 50 mm
Fork travel 300 mm
Rear suspension SACHS Progressive Soft Damp type with single hydraulic shock absorber, spring pre-load adjustment. Compression and rebound adjustment (compression stroke - double adjustment)
Rear wheel travel 296 mm
Front brake 260 mm BREMBO fixed disc "wave" type with hydraulic control and floating caliper
Rear brake 240 mm BREMBO floating disc "wave" type with hydraulic control and floating caliper
Rim front 1.60" x 21", light alloy
Rim rear 2.15" x 18", light alloy
Tyre front 90/90-21" MICHELIN Enduro Competition 3
Tyre rear 120/90-18" MICHELIN Enduro Competition 3
Electrical Equipment
Voltage 12 V
Head light 35/35 W
Pilot light 3 W
Tail light 5 W
Stop light 21 W
Turn signal 10 W
Battery 12 V - 6 Ah