Benelli Tornado Tre 1130, 2009

Benelli Tornado Tre 1130, 2009

USA Specifications

Colors Green with Silver and Black with Silver
Engine Type Liquid cooled in line triple, valve arrangement dohc 12 valve
Bore x Stroke 88 x 62 mm
Displacement 1130cc
Compression Ratio 12.5 to 1
Transmission 6 speed cassette type
Final Drive 525 x-ring chain, engine sprocket Z-16, chain sprocket Z-36.
Chassis weight dry 438 lbs, weight wet 473 lbs
Rake 23.5 degrees, trail 3.74 inches
Wheel Base 55.86 inches
Seat Height 31.89 inches
Fuel Capacity 5.5 gallons
Brakes Brembo
Front 320mm dual floating disc with 4 piston Brembo calipers.
Rear 240mm fixed disc with 2 piston Brembo caliper.
Suspension
Front Fully adjustable 50mm inverted Marzocchi forks w/4.72'' travel
Rear Fully adjustable Extreme Technology single shock w/4.72'' travel
Performance
Horsepower 160.9 @10,500rpm
Torque 91.5ft/lbs@8,000rpm. Quarter mile,10.50 sec., 0-60mph 3.02 sec.,
0-100mph 5.59 sec.,0-120mph 10.48 sec
Fuel Mileage 28.22 mpg city / 33.70 highway. 

Benelli Tre-K 899, 2009

 Benelli Tre-K 899, 2009

 

 

Specifications

Engine 4 stroke, 3 cylinders in line, tilted forwards 15°, fitted with anti-vibration countershaft
Bore X Stroke 88 x 49.2 mm
Engine Displacement 898 cc
Cooling System Liquid cooled
Oil Cooling System Water-oil heat exchanger
Distribution Chain driven double head cam shaft with 4 valves per cylinder
Lubrication Wet sump
Max Power/rpm 79.4 kW at 9000 rpm
Max Torque/rpm 88 Nm at 7500 rpm
Caburation Electronic injection with 1 injector per cylinder
Ignition Single coil inductive
Clutch Wet clutch
Gearbox 6-speed extractable
Transmission Straight toothed primary gear, chain driven secondary
Frame Mixed solution. Front: ASD steel tube trellis,
fastened to boxed rear section, aluminium alloy castings Subframe: aluminium die-cast
Suspension Front: Marzocchi 50 mm diameter “upside down” fork Rear: ASD steel tube trellis swingarm with
Extreme Technology single shock absorber with
adjustable rebound and spring pre-load
Wheels Die-cast aluminium alloy front 3.5”x17”, rear 6.00”x17”
Tyres Tubeless, radial;
Front 120/70 x 17”
Rear 180/55 x 17”
Brakes Brembo;
Front: twin floating disk, 320 mm diameter, with
4 piston caliper;
Rear: single disk, with twin piston caliper
Wheelbase 1514 mm
Dimension 2183 x 1320 x 850 mm (L x H x W)
Seat Height 840 mm
Dry Weight 215 kg